Becken AR COND SPLIT 18000 BTU BAC4258 Manual do proprietário

Aire Acondicionado Split

Ar Condicionado Split

Split air conditioner

BAC4256

BAC4257

BAC4258

BAC4300

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 1 21/01/2019 14:39

Dear client,

Thank you for purchasing this product.

The quality of this appliance has been certied by several

laboratory tests. This instructions manual is provided to

simplify the use of the appliance as well as to guarantee

a safe use.

Please read carefully the instructions and safety measures

described in this manual.

We sincerely hope you will be satised when using your new

appliance.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 2 21/01/2019 14:39

3

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

INDEX

1. SAFETY INSTRUCTIONS 4

1.1. Power Supply 5

1.2. Power Cord and Other Cables 5

1.3. Humidity and Water 5

1.4. Cleaning 6

1.5. General Precautions 6

2. OPERATING INSTRUCTIONS 10

2.1. Product Description 10

2.2. Product Usage 11

2.3. Maintenance 60

3. POSTSALE SERVICE 65

4. ENVIRONMENTAL PROTECTION 65

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 3 21/01/2019 14:39

4

1. SAFETY INSTRUCTIONS

Important Warnings

Before using your appliance read these instructions manual carefully

and keep it in a safe place as you may need to consult it in the future.

Before turning on your appliance, and to ensure a safe and correct

operation, do not use if:

• It has fallen to the ground;

• You notice any evidence of damage;

• Any anomaly occurs during its operation.

To avoid hazards or deterioration of your appliance through incorrect

use it is advisable to read these instructions thoroughly.

Your appliance may not be used for other purposes than the ones

intended and solely for household use. Any damage resulting from

using the appliance outside this scope, any incorrect use, as well as

any manual modifications to the product will not be covered and

automatically voids the warranty.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning: to avoid the risk of electric shock, do not

remove the cover. The interior does not contain any parts

that can be repaired by the user. Ask for the Customer

Support Service.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 4 21/01/2019 14:39

5

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

Assistance

In case of malfunction, take your appliance to the Customer Support

Service for assistance.

This appliance can be used by children from the age of 8 and by

people with reduced physical, sensorial or mental capabilities and/or

lack of experience and knowledge if they have been given instructions

on using the appliance safely and if they understand the hazards

involved. Children may not play with the appliance. Cleaning and

maintenance must not be carried out by children without supervision.

These instructions are also available at www.suporteworten.pt

1.1. Power Supply

Make sure the main voltage is compatible with the appliance’s. If this is

not the case, please consult the Customer Support Service.

1.2. Power Cord and Other Cables

Do not tangle the cord or pull it to disconnect the appliance. Also, keep

the cord away from warm surfaces.

Never use the appliance if it has a damaged cable or socket.

Take it to the Customer Support Service for replacement.

1.3. Humidity and Water

Do not use your appliance in humid places. Do not allow the appliance

to become wet under any circumstances as this may be dangerous.

To avoid re hazard or electric shock do not expose your appliance

to humidity or water. Furthermore, do not place your appliance under

water (e.g. for cleaning).

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 5 21/01/2019 14:39

6

1.4. Cleaning

Before cleaning, be sure to switch o the appliance and remove the

plug from the main power supply. Always allow the unit to cool down

before cleaning.

To clean the exterior of the product, use a dry soft cloth only.

1.5. General Precautions

• Please follow the instructions in the user manual which will help you

to properly install and operate this product and enjoy its advanced

features. Please keep the instructions for future reference.

• Read all instructions before using the product.

• Maintenance and service operations are only to be carried out by

authorized professionals.

• Any damage caused by manual modifications to the product is not

covered by the warranty.

• If this product is used for other purposes than the ones originally

intended, or if it is not correctly connected, the product may become

damaged and the warranty will be voided.

• Incorrect installation due to ignoring instructions can cause serious

damage or injury.

The seriousness of potential damage or injuries is classified as either a

WARNING or CAUTION.

WARNING This symbol indicates that ignoring instructions may

cause death or serious injury.

CAUTION This symbol indicates that ignoring instructions may

cause moderate injury to your person, or damage to

your appliance or other property.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 6 21/01/2019 14:39

7

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

This symbol indicates that you must never perform the action

indicated.

WARNING

DO NOT modify the length of the power supply cord or use an

extension cord to power the unit.

DO NOT share the electrical outlet with other appliances. Improper

or insuicient power supply can cause fire or electrical shock.

When connecting the refrigerant piping, DO NOT let substances

or gases other than the specified refrigerant enter the unit. The

presence of other gases or substances will lower the unit’s capacity

and can cause abnormally high pressure in the refrigeration cycle.

This can cause explosion and injury.

DO NOT allow children to play with the air conditioner. Children

must be supervised around the unit at all times.

1. Installation must be performed according to the installation

instructions by an authorized dealer or specialist. Defective or improper

installation can cause water leakage, electrical shock or fire (In North

America, installation must be performed in accordance with the

requirement of NEC and CEC by authorized personnel only).

2. Contact the Customer Support Service should this unit need repair

or maintenance.

3. Only use the included accessories, parts and specified parts for

installation. Using non-standard parts can cause water leakage,

electrical shock or fire and can cause the unit to fail.

4. Install the unit in a steady location that can support its weight.

If the chosen location cannot support the unit’s weight, or the

installation is not done properly, the unit may drop and cause serious

injury and damage.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 7 21/01/2019 14:39

8

5. Do not use any means to accelerate the defrosting process or to

clean the unit other than those recommended by the manufacturer.

6. The unit shall be stored in a room without continuously operating

ignition sources (for example: open flames, an operating gas appliance

or an operating electric heater)

7. Do not pierce or burn the unit.

8. The unit shall be stored in a well-ventilated area where the room size

corresponds to the room area as specific for operation.

9. Be aware that refrigerants may not contain an odour.

Note: items 6 to 9 above are required for the units using R32/R290

Refrigerant.

10. For all electrical work, follow all local and national wiring standards,

regulations and the Installation Manual. You must use an independent

circuit and single outlet to supply power. Do not connect other

appliances to the same outlet. Insuicient electrical capacity or defects

in electrical work can cause electrical shock or fire.

11. For all electrical work, use the specified cables. Connect cables

tightly and clamp them securely to prevent external forces from

damaging the terminal. Improper electrical connections can overheat

and cause fire and may also cause shock.

12. All wiring must be properly arranged to ensure that the control

board cover can close properly. If the control board cover does

not close properly, it can lead to corrosion and cause the terminal

connection points to heat up, catch fire or cause electrical shock.

13. In certain functional environments, such as kitchens, server rooms, etc.,

the use of specially designed air conditioner units is highly recommended.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 8 21/01/2019 14:39

9

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

14. If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.

CAUTION

For units that have an auxiliary electric heater, DO NOT install the

unit within 1 meter (3 feet) of any combustible materials.

DO NOT install the unit in a location that may be exposed to

combustible gas leaks. If combustible gas accumulates around the

unit, it may cause fire.

DO NOT operate your air conditioner in a wet room such as a

bathroom or laundry room. Too much exposure to water can cause

electrical components to short circuit.

1. The product must be properly grounded at the time of installation or

it can cause electrical shocks.

2. Install drainage piping according to the instructions in this manual.

An improper drainage may cause water damage to your home and

property.

3. The appliance shall be stored so as to prevent mechanical damage

from occurring.

4. Any person involved with working on or breaking into a

refrigerant circuit should hold a current valid certificate from an

industry-accredited assessment authority, which authorizes their

competence to handle refrigerants safely in accordance with an

industry recognized assessment specification.

Note about Fluorinated Gasses

1. This air conditioner unit contains fluorinated gasses. For specific

information on the type of gas and the amount, please refer to

the relevant label on the unit itself. Compliance with national gas

regulations shall be observed.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 9 21/01/2019 14:39

10

2. Installation, service, maintenance and repair of this unit must be

performed by a certified technician.

3. Product uninstallation and recycling must be performed by a

certified technician.

4. If the system has a leak-detection system installed, it must be

checked for leaks at least every 12 months. When the unit is checked

for leaks, proper record-keeping of all checks is strongly recommended.

2. OPERATING INSTRUCTIONS

2.1. Product Description

Accessories

The air conditioner comes with the following accessories. Use all of the

installation parts and accessories to install the air conditioner. Improper

installation may result in water leakage, electrical shock and fire, or

cause the equipment to fail.

Name Shape Quantity

Mounting plate

1

Clip anchor

5

Mounting plate fixing

screw ST3.9 X 25

5

Remote control

1

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 10 21/01/2019 14:39

11

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

2.2. Product installation

WARNING

The appliance must be stored in a well-ventilated area where the room

size corresponds to the room area as specified for operation.

The appliance shall be installed, operated and stored in a room with a

floor area larger than 4 m².

The appliance shall not be installed in an unventilated space, if that

space is smaller than 4 m².

Name Shape Quantity

Fixing screw for

remote control holder

ST2.9 x 10

2 Optional Parts

Remote control holder

1

Dry battery AAA.LR03

2

Seal

1 (for cooling &

heating models only)

Drain joint

Connecting pipe

assembly

Liquid side 6. 35 (1/4 in) Parts you must

purchase. Consult

the dealer about the

pipe size.

9.52 (3/8 in)

Gas side 9.52 (3/8 in)

12.7 (1/2 in)

16 (5/8 in)

19 (3/4 in)

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 11 21/01/2019 14:40

12

For R290 refrigerant models, the room where the appliance is installed

should have the following minimum size:

• ≤ 9000 Btu/h units: 13 m2

• > 9000 B tu/h and ≤12 000 Btu/h units: 17 m2

• > 12 000 Btu/h and ≤18 000 Btu/h units: 26 m2

• > 18 000 Btu/h and ≤24 000 Btu/h units: 35 m2

Installation Summary – Indoor Unit

Select Installation Location

2,3m (90,55in)

15cm (5,9in)

12cm

(4,75in)

12cm

(4,75in)

Determine Wall Hole Position

Drill Wall HoleAttach Mounting Plate

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 12 21/01/2019 14:40

13

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

Connect Piping Connect Wiring

Wrap Piping and Cable

(not applicable for some locations in the US)

Mount Indoor Unit

Prepare Drain Hose

Unit Parts

Note: the installation must be performed in accordance with the local

and national standards. The installation may be slightly dierent in

dierent areas.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 13 21/01/2019 14:40

14

Fig. 1

Air-break switch

1 - Wall Mounting Plate

2 - Front Panel

3 - Power Cable (not included)

4 - Louver

5 - Purifier Filter (not included)

6 - Drainage Pipe

7 - Signal Cable

8 - Refrigerant Piping

9 - Remote control

10 - Remote control Holder

11 - Outdoor Unit Power Cable (not included)

NOTE ON ILLUSTRATIONS

This manual’s figures are for illustration purposes only. The actual

shape of your indoor unit may be slightly dierent, but its actual shape

shall prevail.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 14 21/01/2019 14:40

15

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

Indoor Unit Installation

Fig. 1a

PRIOR TO INSTALLATION

Before installing the indoor unit, refer to the label on the product box

to make sure that the model number of the indoor unit matches the

model number of the outdoor unit.

Step 1: Select the installation location

Before installing the indoor unit, choose an appropriate location.

The following are standards that will help you choose an appropriate

location for the unit.

Proper installation locations meet the following standards:

Good air circulation

Convenient drainage

Noise from the unit will not disturb other people

Steady and solid - the location will not vibrate

Strong enough to support the unit’s weight

A location at least one meter from all other electrical devices

(e.g., TV, radio, computer)

DO NOT install unit in the following locations:

Near any source of heat, steam or combustible gas

Near flammable items such as curtains or clothing

Near any obstacle that might block air circulation

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 15 21/01/2019 14:40

16

Near the doorway

In a location subject to direct sunlight

NOTE ABOUT THE WALL HOLE:

If there is no fixed refrigerant piping:

While choosing a location, be aware that you should leave ample

room for a wall hole (refer to step 3 below) for the signal cable and

refrigerant piping that connect the indoor and outdoor units.

The default position for all piping is the right side of the indoor unit

(facing the unit).

However, the unit can accommodate piping to both the left and right.

Refer to the following diagram to ensure proper distance from walls

and ceiling:

Fig. 1b

15cm (5,9in) or more

2,3m (90.55in) or more

12cm (4,75in)

or more

12cm (4,75in)

or more

Step 2: Attach the mounting plate to the wall

The mounting plate is the device onto which you will mount the indoor

unit.

1. Remove the screw that attaches the mounting plate to the back of

the indoor unit.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 16 21/01/2019 14:40

17

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

2. Place the mounting plate against the wall in a location that meets

the standards in step 1 above (see the Mounting Plate Dimensions for

detailed information on mounting plate sizes).

3. Drill holes to mount the screws in places that:

• have studs and can support the unit’s weight

• correspond to screw holes in the mounting plate

4. Secure the mounting plate to the wall with the screws provided.

5. Make sure that mounting plate is flat against the wall.

NOTE FOR CONCRETE OR BRICK WALLS:

If the wall is made of brick, concrete or a similar material, drill 5 mm-

diameter (0.2 in-diameter) holes in the wall and insert the sleeve

anchors provided. Then secure the mounting plate to the wall by

tightening the screws directly into the clip anchors.

Step 3: Drill the wall hole to connect the piping

You must drill a hole in the wall for refrigerant piping, the drainage pipe,

and the signal cable that will connect the indoor and outdoor units.

1. Determine the location of the wall hole based on the position of the

mounting plate. Refer to the Mounting Plate Dimensions on the next

page to help you determine the optimal position. The wall hole should

have a minimum 65 mm (2.5 in) diameter, and at a slightly lower angle

to facilitate drainage.

2. Using a 65 mm (2.5 in) or 90 mm (3.54 in) (depending on models)

core drill, drill a hole in the wall. Make sure the hole is drilled at a slight

downward angle, so that the outdoor end of the hole is lower than

the indoor end by about 5 mm to 7 mm (0.2-0.27 in). This will ensure

proper water drainage (see Fig. 2).

3. Place the protective wall cu in the hole. This protects the edges of

the hole and will help seal it when you finish the installation process.

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 17 21/01/2019 14:40

18

CAUTION

When drilling the wall hole, make sure to avoid wires, plumbing, and

other sensitive components.

Fig. 2

Indoor Outdoor

Wall

5-7mm

(0,2-0,7in)

MOUNTING PLATE DIMENSIONS

Dierent models have dierent mounting plates.

In order to ensure that you have ample room to mount the indoor unit,

the diagrams below show dierent types of mounting plates along with

the following dimensions:

• Width of the mounting plate

• Height of the mounting plate

• Width of the indoor unit in relation to the plate

• Height of the indoor unit in relation to the plate

• Recommended position of the wall hole (both to the left and right of

the mounting plate)

• Relative distances between screw holes

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 18 21/01/2019 14:40

19

EN

Split air conditioner | Aire Acondicionado Split | Ar Condicionado Split

Correct orientation of Mounting Plate

228,5mm (8,99in)

398mm (15,98in)

805mm (31,7in)

241mm (9,48in)

Indoor unit outline

115.6mm(4.55in) 117.5mm(4.62in)

45mm(1.7in) 101.6mm(4in)

39mm (1,5in)

39mm

(1,5in)

47,1mm

(1,85in)

47,1mm

(1,85in)

Right rear wall

hole 65mm (2,5in)

Model 9k and 12k BTU

Left rear wall

hole 65mm (2,5in)

285mm (11,2in)

439mm (17,28in)

224,2mm (8,82in)

304,1mm (11,9in)

958.3mm (37,7in)

123.6mm(4.86in) 117.5mm(4.62in)45mm(1.7in) 183.6mm(7.2in)

Model 18k BTU

Right rear wall

hole 65mm (2,5in)

Left rear wall

hole 65mm (2,5in)

302mm (11,88in)

47,1mm

(1,85in)

47,5mm

(1,87in) 36,6mm

(1,44in)

Indoor unit outline

506mm (19,92in)

291mm (11,45in)316,7mm (12,4in)

1027,6mm (40,85in)

271,5mm (10,69in) 245mm (9,58in)

Model 24k BTU

Right rear wall

hole 65mm (2,5in)

Left rear wall

hole 65mm (2,5in)

324,9mm (12,79in)

47mm

(1,85in)

45mm

(1,77in)

45mm

(1,77in)

47mm

(1,85in)

55mm

(2.16in)

55mm

(2,16in)

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 19 21/01/2019 14:40

20

Note: when the gas side connective pipe is 16 mm (5/8 in) or more,

the wall hole should be 90 mm (3.54 in).

Step 4: Prepare the refrigerant piping

The refrigerant piping is inside an insulating sleeve attached to the

back of the unit. You must prepare the piping before passing it through

the hole in the wall. Refer to the Refrigerant Piping Connection section

of this manual for detailed instructions on pipe flaring and flare torque

requirements, technique, etc.

1. Based on the position of the wall hole in relation to the mounting

plate, choose the side from which the piping will exit the unit.

2. If the wall hole is behind the unit, keep the knock-out panel in place.

If the wall hole is to the side of the indoor unit, remove the plastic

knock-out panel from that side of the unit (see Fig. 3). This will create a

slot through which your piping can exit the unit. Use needle nose pliers

if the plastic panel is too diicult to remove by hand.

Fig. 3

Knock-out Panel

3. Use scissors to cut down the length of the insulating sleeve to reveal

about 15 cm (6 in) of the refrigerant piping. This facilitates:

• the Refrigerant Piping Connection process

• Gas Leak Checks and enable you to check for dents

4. If the existing connective piping is already embedded in the wall,

proceed directly to the Connect Drain Hose step. If there is no embedded

AF_Manual_AC_9000BTU_BAC4256_BAC 4257_BAC4258_BAC4300_INSTALACAO.indd 20 21/01/2019 14:40

A página está carregando ...

Becken AR COND SPLIT 18000 BTU BAC4258 Manual do proprietário

Becken AR COND SPLIT 18000 BTU BAC4258 Manual do proprietário

em outros idiomas

Artigos relacionados

Outros documentos